WTI-1

KMK UK Limited
General

The RigExpert WTI-1 transceiver interface is designed to operate voice, CW and
digital modes from a computer in a local Wi-Fi network or via the Internet. The WTI-1
is irreplaceable for the following purposes:
1. to operate your transceiver from another room of your house;
2. to operate from another city or country;
3. to share your rig with your friends;
4. to be able to install your antenna at a remote location, if you are unable to do this at home for some reason.
Specifications

General features Wireless transceiver audio interface for operating digital modes, voice recording and playback via local Wi-Fi network or Internet CAT (Computer Aided Transceiver) system
FSK output PTT and CW outputs


Computer connection USB (Universal Serial Bus) connector (only for first-time configuration)
Via a Wi-Fi network (2.4 GHz, “b” or “g”) Powered from the transceiver’s power supply or an external DC source (9…15V, 500mA)

Audio interface Insulated from digital nets Maximum input/output amplitude is 1V
Input/output samplerate: 12kHz True 16-bit DAC/ADC used Volume levels are adjusted by the
controls in ShackLink application

Transceiver connection Single 25-pin connector for transceiver cable Various transceiver models
supported:
CAT serial port Baudrate: 300-115200 baud Electrical compatibility: RS-232,
CI-V, TTL or inverted-TTL (Yaesu, Icom, Kenwood, Ten- Tec, Elecraft and JRC transceivers)
PTT/CW outputs PTT output: open collector and TTL-level CW output: open collector
Maximum current is 500 mA

FSK output Baudrate: 45-1200 baud Open collector output

System requirements Desktop or laptop computer with USB 1/2/3 compliant port Windows 2000/XP/2003/Vista/7/8 (32 or 64-bit) operating system No USB drivers required.

The RigExpert WTI-1 software is provided free of charge
Dimensions: 117 x 80 x 23 mm
Weight: 0.16 kg
products
download
tune
cable diagrams
review products
cavity filters
magnetic loop
buy in Europe
HOME
contact to us